Pulsafeeder PULSAtron Series E Plus Chemical Metering Pump

The Pulsafeeder LPD3SA-WTC1-XXX PULSAtron Series E Plus is a solenoid-driven diaphragm metering pump for controlled chemical dosing. This 115 VAC model delivers up to 12 gallons per day (0.50 GPH / 1.9 LPH) at a maximum pressure of 250 PSI (17 bar).

Dual manual controls let you adjust both stroke rate and stroke length to set the chemical feed output for your application. The PVC pump head and fittings, PTFE (Teflon) seats and O-rings, and ceramic valve balls define this model's liquid-end configuration. Contact Water Treatment Resource for help confirming chemical compatibility before selecting a pump.

Model Specifications

Model: LPD3SA-WTC1-XXX
Manufacturer: Pulsafeeder
Series: PULSAtron Series E Plus
Pump type: Solenoid-driven diaphragm metering pump
Maximum capacity: 12 GPD / 0.50 GPH / 1.9 LPH
Maximum pressure: 250 PSI / 17 bar
Power: 115 VAC
Control: Dual manual stroke rate and stroke length adjustment
Standard turndown ratio: 100:1
Pump head / fittings: PVC
Seats / O-rings: PTFE (Teflon)
Valve balls: Ceramic
Tubing connection: 1/4-inch ID x 3/8-inch OD
Configuration: Standard accessories

Features and Operation

Separate stroke rate and stroke length adjustments provide control over dosing output. The Series E Plus uses an electronic timing circuit and a thermally protected solenoid with automatic reset. Panel-mounted indicator lights and a fuse support operation and circuit protection. Its water-resistant housing supports indoor and outdoor applications, while guided ball check valves help limit backflow and support priming.

The bleed valve helps release air during priming. The Series E Plus is rated for continuous-duty chemical feed service.

Control Configuration

This SA model has manual on/off control with adjustable stroke rate and stroke length. The Series E Plus family also offers separately configured models for 4–20 mA or external pacing inputs. Contact Water Treatment Resource if your application requires automatic control.

Applications and Selection

Use this model for chemical feed duties that fall within its capacity and pressure ratings and are compatible with its wetted materials. Confirm the chemical, concentration, operating conditions, and required dosing rate when selecting a pump. Contact Water Treatment Resource for 230-volt options or PVDF liquid ends for acid applications.

What's Included

LPD3SA-WTC1-XXX metering pump
Foot valve
Ceramic weight
Injection valve
Bleed valve
Tubing

Need help selecting the correct pump or confirming chemical compatibility? Contact Water Treatment Resource for assistance.

View manufacturer specs here.

Pulsafeeder Pulsatron Series E+ LPD3SA-WTC1-XXX Chemical Metering Pump

Have a question?