EBV100 Precision Controls 1" Electric Motorized Ball Valve – 316 Stainless Steel, 120 VAC
Have a question?
The Precision Controls EBV100 1" Electric Motorized Ball Valve combines a full-port, 3-piece 316 stainless steel valve with a 120 VAC quarter-turn electric actuator. A stainless Z-type heat-break bracket and PPL seats support applications including boiler blowdown, condensate, cooling tower bleed and makeup, chemical feed, tank fill, and process isolation.
In stock. Supplied as a factory-assembled valve, actuator, and mounting bracket with a Precision Controls nameplate, wiring diagram, and operating manual.
See specs here — download the Precision Controls EBV Series data sheet (PDF)
Replacement option for Worcester Series 36 actuated ball valves
The Precision Controls EBV100 is a replacement option for complete 1-inch motorized ball valve assemblies using Worcester Series 36 electric actuators, including the MBWB-1 assembly with 10-36 actuator, where the EBV specifications meet the application requirements.
When replacing an existing assembly, verify pipe size, valve face-to-face dimensions, available clearance, operating pressure and temperature, media compatibility, and controller wiring. The EBV uses 120 VAC 3-wire open/close hold-position control; controller wiring changes may be required. Replacement selection is for the complete EBV valve-and-actuator assembly.
Specifications
| Part number / model | EBV100 |
|---|---|
| Connection size | 1" female NPT |
| Valve body | 316 stainless steel, 3-piece, full port |
| Ball / stem | 316 stainless steel |
| Seats | PPL (reinforced PTFE) |
| Pressure rating | 1000 PSI WOG at ambient temperature; derate for hot service |
| Media temperature | -4 to 446 °F (-20 to 230 °C) |
| Actuator ambient temperature | -22 to 140 °F (-30 to 60 °C) |
| Power supply | 120 VAC, 60 Hz (110–120 V) |
| Running current | 0.25 A |
| Operation | Quarter-turn on/off, 0–90°; 20 seconds per 90° |
| Output torque | 50 N·m (442 in-lb) |
| Control | 3-wire hold-position, Circuit B; holds last position on power loss |
| Feedback | SPDT dry contacts for open and closed confirmation |
| Enclosure | IP65 powder-coated aluminum |
| Manual override | Declutch-free hand crank; visual position indicator |
| Mounting / bracket | ISO 5211 F05/F07, 12 mm square drive; stainless Z-type heat-break bracket |
| Cable entry | G1/2 gland, power and signal |
| Bore | 0.98 in |
| Valve face-to-face | 3.54 in |
| Actuator dimensions | 7.0 × 4.8 × 5.2 in |
| Complete assembly weight | 9.0 lb |
| Warranty | One year |
The 1000 PSI WOG rating applies at ambient temperature. Pressure must be derated for elevated media temperatures. Maintain the actuator within its stated ambient temperature range.
Control and wiring
Circuit B uses terminal 1 for common/neutral, terminal 2 for 120 VAC open, and terminal 3 for 120 VAC close. Feedback terminals are 4 (common), 5 (open confirmed), and 6 (closed confirmed). The valve holds position when power is removed. Follow the supplied wiring diagram; never parallel two actuators on one contact.
Available EBV Series sizes are EBV50 (1/2" NPT), EBV75 (3/4" NPT), and EBV100 (1" NPT). This listing is for EBV100, 1" female NPT.


